Please use GoodSearch for your internet searches and select a charity (such as Dominican Sisters of Houston). Thank you.

re-work

Saturday, October 16, 2010

I've been reworking a paint job after rust kept coming through. Consulting with a representative at Sherwin-Williams indicated that the latex primer probably did more harm than good. The recommendation was to strip the paint and start over. GEM rust killer was recommended. Thankfully I didn't have to buy a whole gallon of the stuff; they had a small pump bottle.

A medium wire brush on a power drill was fairly useless for stripping the paint. Sandpaper worked well, but after a few passes, the sandpaper was noticeably less effective than when fresh. I resorted to paint remover and a scraper, followed by coarse sandpaper, followed by medium sandpaper. It took maybe a week, working on and off.

Since both the rust killer and the enamel paint required waiting overnight after treatment, I needed a string of dry days (the project is outdoors). The weather here in Texas has been very dry, so I tackled the project. I've applied two applications of the rust killer and one coat of paint, relying on the rust killer to act as primer. Another coat or two of paint should complete the job.

11/17/2010 update: We had weeklong rain several weeks ago. Where the rust was heavy, some of the rust is starting to reappear through the paint. This area of heavy rust is a metal square tube, so I'm thinking the rust is inside the tube and it's continuing to rust inside on through to the outside.

0 comments: